Regarding order shutters for your home or office, you have to be very cautious while taking the correct dimensions for your shutters. If you do not provide the right dimensions for the shutters, you will not be able to obtain that total finish that you desire to achieve for your windows. This is more important if you are selecting made to measure shutters. In this case, it is important for you to understand that shutter manufactures make shutters on the basis of the dimensions you provide them. If you have not finished this accurately, you cannot charge the company for the imperfect effect. If you send the shutters back to have them altered ( not always possible) , you will only end up spending more money than really required. In brief, if you do not know how to take the right size for the shutters, it can prove to be a very pricey affair for you. ask the retailer for help - it may cost a few extra bucks but it is worth it.
When it comes to taking sizes, you should know that the procedure varies depending upon the type of the shutters as they are positioned and fit in differently. For instance, if you want to take the sizes for the internal shutters, you will have to remember that these shutters (jaloezieen) may be mounted within the day. This means they open within the window recess or the wall opening. Therefore, ensure that while you are taking the sizes, you should also think of the depth of clearance for the window. For those who do not know about the depth of clearance, this is the minimum depth from the open window that the shutters require to work easily without any interference. This all depends on the type of frame that is choosen or the depth of the louvers.
You have to be very cautious while taking the size of the height and breadth and clearance. In reality, in order to evade the chance of error, you are strongly suggested to take more than two sizes, horizontally as well as vertically. Our recomendation is to measure every 12 meter and make a small mock drawing to monitor the sizes as you go. In the day use the smallest recorded size, on the day use the largest recorded size.
A good rule of thumb is to measure top right to bottom left, record the measurement and then measure top left to bottom right and record the size. This will tell you if your window is square enugh to accept a shutter. More than 2 cm difference between the 2 measurements then shutters will not fit without a lot of altering the frames.
This way, you will also be able to find out the exact angle computation. In comparison to the external shutters, the internal shutters are easier to calculate as the external ones need extra hang strips as with frame strips.
You also have to be very cautious while choosing the right kind of measurement tape. The fabric tapes will frequently provide you with misleading results. That is the cause why you are always suggested to use steel tape so as to ensure the correct size.
David Wilson form Shutters Direct In The netherlands is always availible to help with any questions on shutters that you may have
Visit our sister sites for more advice and view our extensive shutter galleries -